The trolling motor mount set is used in boats which will give your boat the perfect strength to withstand the surface tension of water. The trolling motor is usually meant for boats with high torque capacity. The trolling set will gear you up for a perfect fishing day with your friends with no struggle. You can choose a variety of colored brackets for the mounting board of auxiliary boat engine. The new technology has been able to give a variety of choices to the people who are passionate about boats. Hence, the trolling mount set is one way to make way for your hobbies come in handy.
TOP 5 BEST TROLLING MOTOR MOUNT SET REVIEWS
Intex Motor Mount Kit for Intex inflatable Boats
Everyone wants an option for paddling while sitting back in a relaxed manner. This product takes care of all the work while the user can sit back. It can easily be attached to your Intex Boats, which attached very quickly and without any hassles for mounting. It is for a better experience so that the cruiser can sail into the river on a boat with the help of this motor mount kit. This motor mount kit, will attach itself to the rear end of your boat of a motor which can run on a capacity as high speed which will make you fall in love with the new technology.
- It can easily be attached and detached unlike other motor kits which need an extra attention just for the mounting process.
- The mount kit is made of plywood which consists of support arms made of aluminum.
- This model is compatible with Intex inflatable boats of Intex, which are new at the market.
- The mount kit can disassemble for the purpose of extra storage as well.
- The boat can run at a high speed, as high as 3.5 horsepower, with the help of this motor mount kit.
- The quick installation is a very handy process
- The motor runs very smoothly
- The speed is picked up quickly and runs very fast on water.
- Works for the holding of trolling motor which runs on electricity.
- The nut bolts which are provided was not good enough,
- This motor mount kit is only available for newer models of the Intex boats.
MinnKota MKA-16 02 Aluminum Quick Release Bracket Mounts
The mounting plate which is solid is also sloping so that the plate can fit perfectly in a proper way. The time when the process of mounting is complete, the motor cannot slide out of the boat. The plate prevents the motor from sliding outside; rather it slides inside the boat. The aluminum design on the plate makes it a perfect match for your motor. The set screw provided with the plates prevents the motor from falling into the water. The material is heavy duty, hence it is wonderful for weighty usages.
- Mounting instructions and mounting hardware are also provided along with quick release bracket,
- The secure system of lock is ensured with the help of this plate, which prevents the stealing of the motor.
- The installation and removal process is easy with the help of power drive and auto pilot,
- This quick release bracket has aluminum design
- This product weighs 4.5 Pounds approximately, with dimensions of 15 x 9.4 x 1.5 inches.
- The slot combination prevents the mount from movement and locks it in a place.
- No worry of theft, because of the powerful system of locking,
- Very easy to mount or install the bracket,
- Available at a good value and very easily available because of its popularity,
- No hassle or worrying that the motor may slide off the boat, because of the plate.
- If the lock screw does not work properly, then the whole product may fail,
- There is only a finite number of well matched equipment.
Ram Mount RAM-108-1 Trolling Motor Stabilizer
Your motor must make a lot of ruckus with vibrations and tremors. This double socket armed motor stabilizer is just what you need for getting rid of the shuddering of the motor. The long arms of the stabilizer are helpful for the motor. Proper installation can be done with the help of manual provided in the mount motor stabilizer kit. It is a powerful mechanical motor stabilizer which can help you in the long run due to its capacity. The marine grade of aluminum is used for the sake of safety of the cruiser which also provides a great fit.
- The trolling motor’s vibration is completely eliminated,
- The mount, shaft and head of the equipment is protected from sheer damage,
- The dimension of this product’s arm is 6 inches.
- This ram mount motor stabilizer rests on a rubber ball which stabilizes the movement,
- The material used for making this motor stabilizer is aluminum, which keeps the motor safe and secure.
- Marine grade of aluminum is utilized for the making of motor stabilizer.
- Double socket arms are built which are made long enough for supporting the motor.
- The black coat finish gives a very classy touch the motor stabilizer,
- The one and only good solution to trolling motors which can be stabilized,
- It works very well in rough waters, which is due to the RAM, which is very high in quality.
- There may be signs of oxidation or corrosion, because the material used in the product is not stainless steel,
- You might have to buy a new bracket if the screws fall apart.
Garelick/Eez-In Stationary Outboard Motor Bracket
The bracket which is a vertical transom mount shall be used as stationary product for the outward motor. This bracket is very handy for mounting motors. Hence, it has capacity to withstand heavy turning in water. It gives the cruiser a power to ride the motor to its full capacity for which it was purchased at the first place. The need for a bracket will be revealed soon when you buy it because it is a very good purchase with a great value. The dimensions are regular so that you can install them at your old boat too if you do not have a new one.
- The height of the trolling motor and dash is fixed, which is 2 strokes
- This set comes in a 4 piece,
- The pedestal system is made stowable for the sake of convenience,
- The weight of the motor is 75 Lbs, which can go up to speeds as high as 15 Horsepower,
- There will be 304 brackets (stainless) and hardware,
- The Black poly board for mounting is approximately 4 cms length and 20 cms width.
- The motor bracket attaches quickly and smoothly in the swim deck.
- This bracket is perfect for the purpose of mounting motors, which has a capacity to endure high torque motors
- The motor safety is included for the purpose of convenience,
- This bracket mounts to transom, hence it is easy.
- It can only withstand up to 4 stroke motors, and not higher,
- The bracket, if not installed properly, can amount to corrosion and damage.
TMS Outboard Motor Mount Bracket Mounting Board
With this TMS Outboard mounting board, it will become easy for you to raise and mount the trolling motor. Since the bracket is well made, it will handle a small trolling motor well enough. The good built of the bracket make it easy for the cruiser to mount the trolling engine into the boat. A solid casement will result in a good adjustment. Since it has provided 2 strokes, it should work well with the boat. The stainless steel will also protect the bracket from corrosion. This will give the bracket for mounting trolling engine a good durability and strength.
- The white mounting board which is wide and new for the purpose of locking clamps which contains shaft motors, both long and short.
- The easy operation of the motor which can compensate for the water’s surface tension and boat’s loading conditions.
- You will need to twist the lock safely for securing the bracket.
- Horsepower of 30 motors will weigh approximately 169 pounds, and a length of about 9.5 inches.
- Most of the outboard motor locks are easily handled and accepted where the mounting board measures approximately 11 inches length wise and 7.5 inches wide
- The steel exterior can withstand corrosion,
- The locking clamps can make sure that both long and short shafts are contained
- The lock system makes sure that the bracket is secure.
- The bracket can withstand high surface tension of the water.
- The high powered motor cannot be supported well enough for a large boat,
- The full weight use was not up to the mark as described.